Comments on: Brother MFC-7820N and Mac Leopard 10.5 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/ Fri, 30 Jul 2010 12:16:15 +0000 http://wordpress.org/?v=2.5.1 By: smith http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-18810 smith Mon, 17 Aug 2009 23:50:47 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-18810 Hooray!!! I can scan! So thankful for your help. Hooray!!! I can scan! So thankful for your help.

]]> By: Jay http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17994 Jay Wed, 15 Apr 2009 13:09:11 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17994 I downloaded the latest software, and I was able to find and use the colorcenter. Scanning was possible, however the fax and printing function do not work. Any idea of what I am doing wrong? Thanks. I downloaded the latest software, and I was able to find and use the colorcenter. Scanning was possible, however the fax and printing function do not work. Any idea of what I am doing wrong? Thanks.

]]> By: MOMEMOR http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17785 MOMEMOR Fri, 27 Mar 2009 13:56:31 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17785 Thank you so much for this tip. It has solved a problem I had for months. Brother customer service could not give me a straight answer about it. Now the scanner gets back to normal. Thanks again! JC Thank you so much for this tip. It has solved a problem I had for months. Brother customer service could not give me a straight answer about it.
Now the scanner gets back to normal.
Thanks again!
JC

]]> By: Vlad http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17502 Vlad Wed, 25 Feb 2009 13:25:18 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17502 I had no luck with this method. Any further ideas? I had no luck with this method. Any further ideas?

]]> By: Martin http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17377 Martin Mon, 09 Feb 2009 17:30:28 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17377 perhaps I'd better add: MFC-8870DW used wireless perhaps I’d better add: MFC-8870DW used wireless

]]> By: Martin http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17376 Martin Mon, 09 Feb 2009 17:25:19 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17376 brother twain works perfect with Word, but not with Image Capture (Digitale Bilder). Followed everything described here (Device Selector to IP); it does not help. brother twain works perfect with Word, but not with Image Capture (Digitale Bilder). Followed everything described here (Device Selector to IP); it does not help.

]]> By: Rachel http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17363 Rachel Sun, 08 Feb 2009 02:17:20 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17363 Thank you so much! I haven't been able to figure this out and gave up months ago. Now I don't have to buy another scanner, as I thought I'd have to do. ;-) Thank you so much! I haven’t been able to figure this out and gave up months ago. Now I don’t have to buy another scanner, as I thought I’d have to do. ;-)

]]> By: JAM http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17352 JAM Fri, 06 Feb 2009 23:17:13 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-17352 Followed the steps per your instructions, works just like it did in 10.4. Thanks for saving me a couple hundred bucks on a new MFP. BTW, the 10.5 upgrade did not cause a problem, it was when I was trying to install "Control Center" on my new MacBook Pro. Followed the steps per your instructions, works just like it did in 10.4. Thanks for saving me a couple hundred bucks on a new MFP. BTW, the 10.5 upgrade did not cause a problem, it was when I was trying to install “Control Center” on my new MacBook Pro.

]]> By: smg http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-14903 smg Thu, 30 Oct 2008 04:42:01 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-14903 Hi, I know this is an old post, but hopefully you don't mind a new comment. I followed your directions, but there is no DeviceSelector in the Utilities folder. I actually ran the install twice with no luck. Any ideas? Hi,

I know this is an old post, but hopefully you don’t mind a new comment. I followed your directions, but there is no DeviceSelector in the Utilities folder. I actually ran the install twice with no luck. Any ideas?

]]> By: MR Ram http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-14174 MR Ram Mon, 13 Oct 2008 22:09:58 +0000 http://blog.notarus.net/2008/03/05/brother-mfc-7820n-and-mac-leopard-105/#comment-14174 I have similar scanning problems on 10.5.2 with a brother MFC-465. Scanning via LAN works o.k. through Brother's Control Center. However the TWAIN plug-In will only be recognized by certain applications and will be ignorde by others. Photoshop CS2 can open the TWAIN interface, as well as iCalamus. Ragtime 6 finds the TWAIN module but only produces error messages, Graphic Converter and Photoscore cannot find the TWAIN driver. This is regardless of whether I choose specify by IP-adress or by mDNS in the Device chooser. what a pain! any ideas for relief? I have similar scanning problems on 10.5.2 with a brother MFC-465.
Scanning via LAN works o.k. through Brother’s Control Center.
However the TWAIN plug-In will only be recognized by certain applications and will be ignorde by others. Photoshop CS2 can open the TWAIN interface, as well as iCalamus. Ragtime 6 finds the TWAIN module but only produces error messages, Graphic Converter and Photoscore cannot find the TWAIN driver.
This is regardless of whether I choose specify by IP-adress or by mDNS in the Device chooser.
what a pain! any ideas for relief?

]]>